Follow

How to Transfer your Local "System" MVN License to a different PC

If you have accidentally installed a system license to the wrong PC, then you are able to move it to a different PC. Remember that the system license is a local license and can only run on one PC that it's installed to. 

NOTE: This is for "System" local licenses, not Dongle or Network licenses.

Procedure

Step 1: Download the RUS Utility on the PC that has the system license installed (the Original PC) and on the PC where you would like the system license to live (the Target PC).

 Step 2: Open the RUS utility on the Target PC, go to the "Transfer License" tab, and create an .id file by clicking the 3 dots in "Step 1". You can name this .id file anything you choose and save it to your desktop to keep things simple.  

L1.JPG   

L2.JPG

When you press "save", a file path will be loaded into the blank field next to "save recipient information to". Then, press "Collect and Save Information". A window will appear stating that the recipient information has been stored.   

L3.JPG 

NOTE: The path will have a different user name and/or different path depending on where you saved the .id file. 

Step 3: Either email the .id file from your Target to Original PC or use a thumb drive to transfer the .id file. 

Step 4: Open the RUS utility on the Original PC. Go to the "Transfer License" tab, and load the .id file to the blank field next to "read the recipient information file". 

L4.JPG

Step 5: Click on the 3 dots to the right of the blank field that says "generate the license transfer file". Name the .h2h file and save it to a convenient place.

L5.JPG

When you press "save", the file path will be loaded to the blank field next to "generate the license transfer file". Then, press the "Generate License Transfer File" button. A window will appear that will confirm you'd like to transfer your MVN license. 

L6.JPG 

Step 6: Either email the .h2h file from your Original to Target PC or use a thumb drive to transfer the .h2h file. 

Step 7: Go back to the Target PC, open the RUS utility, go to the "Apply License File" tab, and load the .h2h file. 

L7.JPG  

Once loaded, the rehosted information will appear in the large black field. Press "Apply License". If done correctly, the words "Update written successfully" will appear. 

Step 8: Close the RUS utility and open MVN on the Target PC. At this step, MVN (the application) should have already been downloaded from the Xsens website. If not, download MVN first, then open.

 

  

 

 

     

 

 

Was this article helpful?
0 out of 0 found this helpful
Do you have a question? Please post your question in our Community Forum