My MTi-680G is not detected / Installing the MTi USB dongle driver for Linux

The MTi USB dongle allows users to connect the MTi-680G to a USB port. Support for this accessory is not yet present in older Linux versions of the MT Software Suite. The drivers can be installed separately using:

$ sudo /sbin/modprobe ftdi_sio
$ echo 2639 0301 | sudo tee /sys/bus/usb-serial/drivers/ftdi_sio/new_id
After installing the drivers, the USB dongle should automatically be mounted to ttyUSB. This can be verified using the dmesg command.
Was this article helpful?
0 out of 0 found this helpful
Do you have a question? Please post your question in our Community Forum